Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch years of trouble free use

years of trouble free use and adequate reinforcement for pump pressures to 300 PSI

This hose is constructed of an EPDM synthetic rubber tube and a double layer of 100% polyester woven jackets

Attaches to hydrant end of hose and need not be removed when charging the line

Carbon Steel 4" Raised Faced ANSI 150 Flange x 4" Storz

The back flush flap will open to aid in releasing debris

Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch years of trouble free useAluminum adapters are fabricated from seamless extruded 6061 T6 aluminum and hard coat anodized per MIL A 8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. Gasket installed.